HPI logo It's all about TRUST & EXCELLENCE

The mini power pack 2G, a modular approach

The second generation of JTEKT HPI mini power packs is based on a 100% modular concept incorporating exclusive elements:

  • a die-cast support integrating the basic functions in the form of cartridges
  • a series 1 pump with high output allowing the service rate of the power pack to be increased
  • the possibility of creating complex systems by fitting valves into two sets of different ports possibly including integrated electronic control.
  • a wide range of tanks from 0,5 to 25 litres as standard

montage 5 2048 logo_ancienne mini centrale

 

Choice of motors

The JTEKT HPI micro power packs are available in direct current or in alternating single and three phase current : flow from 2 to 25.8 l/min. at a maximum pressure of 300 bar.

Direct current (12 and 24 V):

MNC 2G CC

 

Alternating current (single and three phase):

 

MNC 2G CA

Cartridge design concept

To ensure improved reliability and a maximum adaptability, JTEKT HPI mini power packs are designed around a cartridge system which fit into the support.

  • The pressure relief valve and the check valve are two cartridges inserted directly into the support which it is easy to disassemble for modification or maintenance.
VNF : Normally closed valve
VNO : Normally opened valve
VLB : Bi-directional logical valve
A03(valve)
 4/2 Valve D61(valve)
4/3 Valve E84(valve)
Proportional valve A103(valve)
Free flow FREE FLOW Z5096367
Single and double effect cylinder VERIN 116129 verin 117015
Hand pump POMPE A MAIN 114630
Valves on block Bloc valve
Blocks MBS® 3 valves 3 positions BLOC MBS
Support MNC 2G en coupe

Adaptability

 

The design of the mini power pack 2G allows the production of complete hydraulic systems incorporating :

  • Powerful motors
  • A support allowing the production of complex applications by integrating hydraulic functions into two sets of ports
  • Integration of electronic control of valves on the power pack as in the case of SMC*
  • A range of standard tanks which allows adaptation to the application with the smallest possible overall dimensions

(*) Soft Motion Control is a an exclusive system for electronic control of valves allowing the transitory phases of acceleration and deceleration to be managed (for more information, please contact HPI).

Tanks-Mini power pack

 

A full range of alternating or direct current motors

Pump capacity of 1 to 6 cm3/rev.

Tanks for all applications from 0,5 à 25 liters

 

Visuel Configuration

Build your product

Access to configurators
Visuel Catalogue

Our technical catalog

Download

Find your distributor